In this chapter, we will describe triple cogeneration technologies for solar conversion. The costs of solar conversion technologies are determined by the efficiency of power conversion, the lifetime and reliability of its components, the cost of the raw materials, potentially including storage, and any fabrication or construction required. Recently, photovoltaics and solar thermal have emerged as viable candidates for low cost power production; they each have losses that vary across the solar spectrum, with realized and theoretical efficiencies that are well below fundamental thermodynamic limits. Thus, it is desirable to split the solar spectrum to utilize both technologies in parallel over their respective optimal wavelength ranges. This chapter will present promising triple co-generation solutions that have been developed and implemented to provide electric power generation by a combination of photovoltaic and thermal generation. In particular, we show that splitting the solar spectrum, and then using high-energy solar photons for photovoltaics and medium-energy solar photons for thermoelectrics with a bottoming Rankine cycle has potential to achieve 50% solar-to-electricity conversion using existing materials. Also, over 50% of the harvested energy goes to thermal storage for generation after sunset, which could enable highly efficient baseload solar electricity and heat generation at all hours of the day.

Narducci, D., Bermel, P., Lorenzi, B., Wang, N., Yazawa, K. (2018). Photovoltaic–Thermoelectric–Thermodynamic Co-Generation. In Hybrid and Fully Thermoelectric Solar Harvesting (pp. 117-136). Springer Verlag [10.1007/978-3-319-76427-6_7].

Photovoltaic–Thermoelectric–Thermodynamic Co-Generation

Narducci D.
;
Lorenzi B.;
2018

Abstract

In this chapter, we will describe triple cogeneration technologies for solar conversion. The costs of solar conversion technologies are determined by the efficiency of power conversion, the lifetime and reliability of its components, the cost of the raw materials, potentially including storage, and any fabrication or construction required. Recently, photovoltaics and solar thermal have emerged as viable candidates for low cost power production; they each have losses that vary across the solar spectrum, with realized and theoretical efficiencies that are well below fundamental thermodynamic limits. Thus, it is desirable to split the solar spectrum to utilize both technologies in parallel over their respective optimal wavelength ranges. This chapter will present promising triple co-generation solutions that have been developed and implemented to provide electric power generation by a combination of photovoltaic and thermal generation. In particular, we show that splitting the solar spectrum, and then using high-energy solar photons for photovoltaics and medium-energy solar photons for thermoelectrics with a bottoming Rankine cycle has potential to achieve 50% solar-to-electricity conversion using existing materials. Also, over 50% of the harvested energy goes to thermal storage for generation after sunset, which could enable highly efficient baseload solar electricity and heat generation at all hours of the day.
Capitolo o saggio
thermoelectricity: solar harversting; photovoltaics;
English
Hybrid and Fully Thermoelectric Solar Harvesting
2018
978-3-319-76426-9
268
Springer Verlag
117
136
Narducci, D., Bermel, P., Lorenzi, B., Wang, N., Yazawa, K. (2018). Photovoltaic–Thermoelectric–Thermodynamic Co-Generation. In Hybrid and Fully Thermoelectric Solar Harvesting (pp. 117-136). Springer Verlag [10.1007/978-3-319-76427-6_7].
none
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10281/301973
Citazioni
  • Scopus 1
  • ???jsp.display-item.citation.isi??? ND
Social impact