The decrease of solar cell efficiency with temperature is a known problem for photovoltaics (PV). Temperature sensitivity can lead to a considerable amount of energy losses over the lifetime of solar panels. In this perspective Hybrid Thermoelectric-Photovoltaic (HTEPV) systems, which recover solar cell heat losses to produce an additional power output, can be a suitable option. However only hybridization of wide-gap solar cells is convenient in terms of efficiency gains and deserves investigation to evaluate HTEPV devices effectiveness. In this work we report the modeling and the development of customized bismuth telluride thermoelectric generators, optimized to be hybridized with amorphous silicon (aSi), Gallium Indium Phosphide (GaInP) or Perovskites solar cells. The model results showed in all three cases efficiency gains with a maximum of +3.1% for Perovskites (from 16.4% to 19.5%). These enhancements were then experimentally validated for the case of Perovskites solar cells, for which maximum gains were found to occur at typical operating temperatures of conventional PVs. This experimental evaluation demonstrated in an accurate fashion the real potential of thermoelectric hybridization of solar cells.
Lorenzi, B., Mariani, P., Reale, A., Di Carlo, A., Chen, G., Narducci, D. (2021). Practical development of efficient thermoelectric – Photovoltaic hybrid systems based on wide-gap solar cells. APPLIED ENERGY, 300(15 October 2021) [10.1016/j.apenergy.2021.117343].
Practical development of efficient thermoelectric – Photovoltaic hybrid systems based on wide-gap solar cells
Lorenzi B.
Primo
;Narducci D.Ultimo
2021
Abstract
The decrease of solar cell efficiency with temperature is a known problem for photovoltaics (PV). Temperature sensitivity can lead to a considerable amount of energy losses over the lifetime of solar panels. In this perspective Hybrid Thermoelectric-Photovoltaic (HTEPV) systems, which recover solar cell heat losses to produce an additional power output, can be a suitable option. However only hybridization of wide-gap solar cells is convenient in terms of efficiency gains and deserves investigation to evaluate HTEPV devices effectiveness. In this work we report the modeling and the development of customized bismuth telluride thermoelectric generators, optimized to be hybridized with amorphous silicon (aSi), Gallium Indium Phosphide (GaInP) or Perovskites solar cells. The model results showed in all three cases efficiency gains with a maximum of +3.1% for Perovskites (from 16.4% to 19.5%). These enhancements were then experimentally validated for the case of Perovskites solar cells, for which maximum gains were found to occur at typical operating temperatures of conventional PVs. This experimental evaluation demonstrated in an accurate fashion the real potential of thermoelectric hybridization of solar cells.File | Dimensione | Formato | |
---|---|---|---|
Lorenzi-2021-Applied Energy-AAM.pdf
Accesso Aperto
Tipologia di allegato:
Author’s Accepted Manuscript, AAM (Post-print)
Licenza:
Creative Commons
Dimensione
1.35 MB
Formato
Adobe PDF
|
1.35 MB | Adobe PDF | Visualizza/Apri |
Lorenzi-2021-Applied Energy-VoR.pdf
Solo gestori archivio
Tipologia di allegato:
Publisher’s Version (Version of Record, VoR)
Licenza:
Tutti i diritti riservati
Dimensione
3.32 MB
Formato
Adobe PDF
|
3.32 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.