Raman spectroscopy is commonly used for the optical characterization of structural properties of SiGe alloys but a measurement of the Raman efficiency as a function of excitation wavelength and concentration is still lacking. This information is nevertheless important for the interpretation of data, especially for the analysis of inhomogeneous samples. In this work, the relative Raman efficiency of Si1−xGex alloys has been obtained for several excitation energies as a function of the composition x with steps of Δx ~ 0.02 across the whole composition range. We observed resonances in correspondence of the E1 /E1+Δ1 and E0 /E0+ Δ0 transitions. For a fixed excitation energy the efficiency varies of about 2 orders of magnitude vs the composition of the alloy, while, for a fixed composition, we observed a change in efficiency of up to 3 orders of magnitude depending on the excitation energy. The maximum scattering efficiency at resonance decreases by an order of magnitude when moving from silicon-rich to germanium-rich alloys. The data are discussed in terms of the polarizability and compared to the literature relative to pure silicon and germanium. The data reported in this paper can be used to design experiments under resonant conditions to selectively probe different regions in inhomogeneous samples.

Picco, A., Bonera, E., Grilli, E., Guzzi, M. (2010). Raman efficiency in SiGe alloys. PHYSICAL REVIEW. B, CONDENSED MATTER AND MATERIALS PHYSICS, 82(11) [10.1103/PhysRevB.82.115317].

Raman efficiency in SiGe alloys

PICCO, ANDREA;BONERA, EMILIANO;GRILLI, EMANUELE ENRICO;GUZZI, MARIO
2010

Abstract

Raman spectroscopy is commonly used for the optical characterization of structural properties of SiGe alloys but a measurement of the Raman efficiency as a function of excitation wavelength and concentration is still lacking. This information is nevertheless important for the interpretation of data, especially for the analysis of inhomogeneous samples. In this work, the relative Raman efficiency of Si1−xGex alloys has been obtained for several excitation energies as a function of the composition x with steps of Δx ~ 0.02 across the whole composition range. We observed resonances in correspondence of the E1 /E1+Δ1 and E0 /E0+ Δ0 transitions. For a fixed excitation energy the efficiency varies of about 2 orders of magnitude vs the composition of the alloy, while, for a fixed composition, we observed a change in efficiency of up to 3 orders of magnitude depending on the excitation energy. The maximum scattering efficiency at resonance decreases by an order of magnitude when moving from silicon-rich to germanium-rich alloys. The data are discussed in terms of the polarizability and compared to the literature relative to pure silicon and germanium. The data reported in this paper can be used to design experiments under resonant conditions to selectively probe different regions in inhomogeneous samples.
Articolo in rivista - Articolo scientifico
semiconductors, spectroscopy, Raman
English
2010
82
11
115317
none
Picco, A., Bonera, E., Grilli, E., Guzzi, M. (2010). Raman efficiency in SiGe alloys. PHYSICAL REVIEW. B, CONDENSED MATTER AND MATERIALS PHYSICS, 82(11) [10.1103/PhysRevB.82.115317].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10281/19512
Citazioni
  • Scopus 26
  • ???jsp.display-item.citation.isi??? 21
Social impact